Hunting Wear · Archival manufacturing project
Whitetail Snow Camouflage Hunting Bib Overalls
This archival hunting bib from Sialkot Sample Masters combines three-layer waterproof fabric with 150 g PrimaLoft insulation. The July 2021 photographs show the crossed suspenders, pocket openings and zippered lower leg on the finished Whitetail Snow camouflage sample.
Sialkot Sample Masters · Sialkot, Pakistan
Inspect the garment details ↓
Front view
The front view shows the shaped bib, two webbing straps with black buckle hardware and adjusters, and the angled thigh openings.
CategoryHunting Wear
Archive photographs28 July 2021
SuspendersCrossed at the rear
Leg constructionZippered lower-leg opening
Confirmed material specifications
Fabric, insulation and camouflage
- Fabric composition
- 96% polyester / 4% spandex
- Fabric construction
- Three-layer waterproof fabric
- Insulation
- 150 g PrimaLoft insulation
- Camouflage pattern
- Whitetail Snow Camouflage
Waterproof refers to the confirmed fabric specification. Finished-garment ratings, seam-sealing method and lining material are undocumented for this sample.
Features visible in the archival photographs
Suspender, pocket and leg construction
Crossed suspenders with front buckle hardware
Two wide webbing straps run over the shoulders and cross in an X at the back before meeting the rear bib panel. The front views show black buckle hardware and rectangular strap adjusters on both straps. The shaped upper bib curves down at the sides, and the photographs show the strap attachment points at the upper edge.
Hip access and zippered thigh detail
The side photograph shows a hand inside a hip pocket opening. The front view shows angled openings across the thighs. A close-up of one thigh opening shows a dark zipper pull recessed between matching camouflage edges, with visible stitching along the opening.
Zippered lower-leg opening
A narrow camouflage strip runs along the outer leg. In the kneeling photograph the zipper is open from the hem to near the knee, and the outer panel folds back to reveal a dark interior surface. The image shows the opening in use and the stitching alongside the zipper.
Visible seams and edge finishing
Front and rear views show a horizontal join where the bib meets the trouser section. The front also shows stitching along the curved upper bib edge. Close-ups show the stitch lines around the pocket opening and along the lower-leg zipper strip and hem edge.
Original Garment Photography
Rear, side and construction views
Rear view
The straps cross in an X above the rear bib panel. The waist join and rear panel shape are visible.
Side view
The model places a hand inside a hip pocket opening. The view also shows the shaped side edge of the bib and the strip along the outer leg.
Zippered pocket
A dark zipper pull sits between camouflage edges. Stitch lines trace the upper and lower edges of the opening.
Outer-leg construction
The photograph shows the thigh zipper above the narrow camouflage strip and the stitching running down the outer leg.
Kneeling demonstration
The unzipped panel opens from the hem to near the knee, exposing a dark interior surface while the model kneels.
The front, side and kneeling views are cropped above the garment for model privacy.
OEM/ODM customization
Custom insulated hunting bib development for apparel brands
Sialkot Sample Masters develops custom hunting apparel in Sialkot, Pakistan, for brands in the United States, Canada, Australia and other international markets. Use this archival bib as a construction reference when specifying a private-label hunting bib. Define the layering allowance, approved camouflage artwork, suspender length, buckle type, pocket placement and leg opening in the tech pack.
During sampling, check strap adjustment, pocket access and the lower-leg opening with the intended footwear and layers. If your brief calls for a finished-garment waterproof target, specify the test method and acceptance criteria before sample approval.
See our custom hunting apparel manufacturing and OEM/ODM development and sampling services.
USA · Canada · Australia
Request a quote for custom hunting bib overalls
Send your tech pack, reference garment or sketches, size range, target quantities and destination market. Include the shell and insulation requirements, suspender hardware, pocket layout, leg opening and authorized artwork so we can scope sampling or a bulk quote.
Request a Manufacturing Quote ↗Sialkot Sample Masters · Custom apparel development and OEM/ODM manufacturing
