Hunting Wear · Custom Hunting Jacket Manufacturing Case Study
Grey-Blue Camouflage Multi-Pocket Hunting Jacket
This custom hunting jacket from Sialkot Sample Masters pairs a three-layer outer fabric in grey-blue timber camouflage with zippered chest and sleeve storage, lower flap pockets and layered cuffs. The photographs and outdoor demonstration show construction details that OEM/ODM buyers can use when specifying their own jacket.
Sialkot Sample Masters · Sialkot, Pakistan
Inspect the garment details ↓
Front and sleeve pocket
The front view shows the raised hood, center-front zipper, zippered upper-sleeve pocket and gold embroidery.
CategoryHunting Wear
Outer fabricThree-layer construction
Camouflage patternGrey-blue timber camouflage
Cuff constructionOuter tab and inner cuff
Confirmed specification
Three-layer outer fabric
Outer fabric: Three-layer construction.
Camouflage pattern: Grey-blue timber camouflage with irregular blocks, branch-like shapes and areas of honeycomb patterning.
Observed construction
Hood, pocket access and sleeve details
Shaped hood and center-front closure
The raised hood has visible panel seams and small black adjustment hardware near the face opening. A full-length black zipper runs down the center front, and two horizontal black webbing tabs sit at the upper chest. The rear view shows a seam across the upper back and the shell extending below the waist.
Chest, lower-front and sleeve storage
Two vertical zipper openings are visible on either side of the main front zipper. The chest close-up shows a lifted camouflage flap, a dark interior surface and stitching around the adjacent opening. Lower on the front, broad flaps cover shaped pockets with visible volume folds. A separate zippered pocket sits on the upper sleeve.
Outer cuff tab and inner cuff
The photographs show black outer cuff tabs and distinct panel seams around the elbow. In the outdoor demonstration, the wearer lifts the outer cuff to show the dark inner cuff.
Original garment photography
Inspect the jacket from four angles
Three-quarter view
From the side, the lower pocket flap, sleeve pocket zipper and contrasting cuff tab are visible.
Rear and hood
The rear view shows the hood panel joins, a seam across the upper back and the shell extending below the waist.
Chest pocket close-up
The close-up shows the lifted chest-pocket flap, a dark inner surface and the stitching around the flap and adjacent zipper opening.
The photographs use digitally edited backgrounds for consistent presentation. Select any photograph to inspect the garment in the lightbox.
Original video stills
Outdoor Rain Demonstration
The outdoor footage shows the same jacket design as the product photographs. The frames show droplets beading on the outer fabric and document the wet sleeve and layered cuff. These are visual observations from an outdoor demonstration. A finished-garment waterproof rating or laboratory result is unverified.
Jacket in outdoor rain
A wider view shows the hooded jacket worn outdoors in falling rain.
IMG_4057.MOV · 1:01
Water beads on the upper back
Droplets sit on the outer fabric near the seam below the hood.
IMG_4057.MOV · 0:17
Hood, shoulders and chest
A front close-up shows the hood and upper shell in rain, with the two chest zipper openings visible.
IMG_4057.MOV · 1:07
Wet sleeve above the bucket
The wet sleeve and black wrist cuff are visible above the bucket during the demonstration.
IMG_4058.MOV · 0:09
Outer cuff lifted
The demonstrator lifts the outer cuff to show the dark inner cuff area.
IMG_4058.MOV · 0:15
OEM/ODM development
Develop a custom camouflage hunting jacket
Sialkot Sample Masters works with hunting and outdoor apparel brands in the United States, Canada, Australia and other markets. For a project based on this design, define the pocket layout, intended contents, hood fit and cuff overlap in your tech pack. Share approved camouflage artwork and any branding requirements early so their scale and placement can be reviewed on the sample.
During sampling, check pocket and zipper access with the intended gloves and layers, and review hood movement and sleeve reach. If your brief includes a weather-performance target, specify the test method and acceptance criteria before sample approval.
Explore our hunting apparel manufacturing and product development and sampling services.
USA · Canada · Australia
Request a quote for a custom hunting jacket
Send your tech pack, sketches or reference garment, along with your outer fabric requirements, hood and pocket layout, size range, target quantities and destination market. We can review the brief for sampling or bulk manufacturing.
Request a Manufacturing Quote ↗Sialkot Sample Masters · Custom apparel development and OEM/ODM manufacturing
